ECP 26" Aluminum Big Block Mopar Radiator - Dual 13" 3600 CFM Fans - Massive Dual 1-1/4" Tubes

The big block Mopar includes a range of displacements from 383 to well over 500 cubes in modern crate motor incarnations. Hemi motors are also included in this category of engines.

In most builds, the radiator is one of the last thing most guys purchase. Only to find they have some major clearance issues. If you have one of these beasts, you probably know the dilemma most big block Mopar guys face:

• A big block motor with lots of horsepower
• Limited space in the engine bay for a powerful radiator and fan combo
• A serpentine system that eats away at precious space for cooling fans
• Modern A/C that requires even more cooling power

It's a very difficult combo to keep cool. But fortunately, it's we solve for big block Mopar guys on almost a daily basis.

The real dilemma here is there is just minimal space for a big high powered cooling fans that move enough CFM to keep your big block Mopar cool. Especially when you add A/C into the mix.

Fortunately, we’ve helped 1000s of big block Mopar guys figure out a cooling setup that works.

Part of our secret sauce is starting with a good foundation based on modern cooling engineering: 2-rows with big 1-1/4"” tubes. No Chinese 3-row and 4-row non-sense that will never keep your serious big block Mopar cool.

If you’re reading this, chances are you might have tried one of the Holly Hobby cheap radiators with Holly Hobby fans that cannot even keep your motor cool after a 10 minute light cruise around the neighborhood. 

Don’t let an inadequate radiator setup rain on your big block Mopar parade. 

This unit is part of our HD3 series for high horsepower cooling over 550HP up to 800HP. It features 2-rows of mammoth 1-1/4" tubes to put the beat-down on any Mopar cooling problem.

This unit features our dual aluminum 13" HPX mid line fans that will fit on most big block Mopars with serpentine drives. The overall thickness is 6-13/16" to the top of the motors to the core support mounting flange.

However due to the endless combination of serpentine drive setups, please call our sales techs (773)599-3067 if you are unsure about fan clearance. We recommend calling to confirm measurements. 

Here's why this radiator is the perfect match for your big block Mopar:

• Dual High Powered 13" HPX Fans: These 13" HPX fans with all aluminum housings deliver 1800 CFM each for a combined 3600 CFM. No Holly Hobby cheap over rated garbage fans that will struggle to cool your lawn mower.  

• Massive 1-1/4" cooling tubes: Bigger 1-1/4" tubes, even bigger than the 1.0" tubes we use in our standard line. More efficient than the smaller tubes found in 3-row radiators, ensuring maximum cooling for your high-performance engine.
• Heavy-duty plate aluminum transmission cooler: No wimpy concentric coolers here! This one's built to handle the power you're putting down.
• Direct-fit installation: Bolts right in place of your original radiator. No modifications needed, so you can get back to cruising in no time.
• Die-formed aluminum tanks: Durable and leak-free, for years of worry-free performance.
• Lifetime warranty: Drive with confidence knowing you're covered.

Stop sweating over overheating.

Upgrade to a radiator that can handle the heat of your big block Mopar.

We’ve been able to be super creative with different fan combos that are proven to work with big block Mopar engines. 

Give our sales techs a call (773)599-3067 to go over your big block Mopar setup so we can put together a combo that is guaranteed to cool in 95 degree heat with the A/C blasting.

For help putting together a killer cooling setup for your big block Mopar, give our heavily Mopar big block experienced sales guys a call at (773)599-3067.